Auburn Blazer - Cashmerette Patterns

Auburn Blazer- Cashmerette Patterns:

• SKU: 873586

• Manufacturer number: 5301

• Finally, a blazer that fits curves! Experience the joy of a classic lined blazer designed specifically for a full bust. The Auburn Blazer features sleek princess seams, a sophisticated notched collar, and a single button closure. Complete the look with angled welt pockets and two-piece vented sleeves, or go for a cropped length and a clean sleeve finish. Whether sewn in a woven, stretch woven, or stable knit, the Auburn is sure to add polish to your wardrobe and style.

• SEWING LEVEL: Intermediate

• SIZING: 12 to 32, in cup sizes C-H.

• RECOMMENDED FABRICS: 

  - Main fabric for woven blazer: Mid- to heavy-weight wovens, such as suiting or tweed, made from wool, linen, or wool blends. Lightweight coating is also suitable. Avoid fabrics with a very smooth surface like gabardine, as they will likely shine when pressed.

  - Main fabric for stretch blazer: Mid- to heavy-weight knit fabric such as stable ponte, or mid-weight stretch wovens such as stretch suiting.

  - Body lining: If using a non-stretch woven, use a light- weight woven lining such as rayon bemberg or crepe de chine. If using a stretch woven or ponte, use a knit lining for the body, such as ITY or other slick jersey.

  - Sleeve lining: Light-weight woven lining such as rayon bemberg or or crepe de chine, for both stretch & non-stretch blazers.

  - Pocket lining: Stable woven such as quilting cotton for shirting.

  - Interfacing: Mid-weight weft fusible interfacing and mid- weight knit fusible interfacing. Optional: use heavier weight interfacing for pocket welt; fusible horsehair canvas can be used for chest shield interfacing.

• NOTIONS:

  - Universal (for non-stretch) or stretch needle, hand sewing needle, thread

  - View A: 2 3/8 yd (2.2 m) of 1 – 1 ½” (2.5 – 3.8 cm) wide bias tape (homemade) or 5/8” – ¾” (1.5 – 1.9 cm) wide single fold bias tape (store bought)

  - View B: ½ yd (0.5 m) of 1 – 1 ½” (2.5 – 3.8 cm) wide bias tape (homemade) or 5/8”– ¾” (1.5 – 1.9 cm) wide single fold bias tape (store bought)

  - One 1 – 1 1⁄4” button (center front), six ½” – 5/8” buttons (sleeve vents) for View A only.

  - Shoulder pads (3/8”/1 cm – ½”/12 mm thick). Rounded jacket/blazer shoulder pads are best and are typically around 6.5” (16.5 cm) by 4” (10.2 cm).

  - Straight grain fusible stabilizing tape (Alternatively, if your interfacing has a direction with NO stretch, even mechanical, you can cut a ½” strip along the direction with no stretch.)