Skip Navigation Website Accessibility
Seams logo. Text reads
 


Auburn Blazer - Cashmerette Patterns

left in stock in

Low in store inventory, may be subject to change

Auburn Blazer- Cashmerette Patterns:

  • SKU: 873586

  • Manufacturer number: 5301

  • Finally, a blazer that fits curves! Experience the joy of a classic lined blazer designed specifically for a full bust. The Auburn Blazer features sleek princess seams, a sophisticated notched collar, and a single button closure. Complete the look with angled welt pockets and two-piece vented sleeves, or go for a cropped length and a clean sleeve finish. Whether sewn in a woven, stretch woven, or stable knit, the Auburn is sure to add polish to your wardrobe and style.

  • SEWING LEVEL: Intermediate

  • SIZING: 12 to 32, in cup sizes C-H.

  • RECOMMENDED FABRICS: 

    - Main fabric for woven blazer: Mid- to heavy-weight wovens, such as suiting or tweed, made from wool, linen, or wool blends. Lightweight coating is also suitable. Avoid fabrics with a very smooth surface like gabardine, as they will likely shine when pressed.

    - Main fabric for stretch blazer: Mid- to heavy-weight knit fabric such as stable ponte, or mid-weight stretch wovens such as stretch suiting.

    - Body lining: If using a non-stretch woven, use a light- weight woven lining such as rayon bemberg or crepe de chine. If using a stretch woven or ponte, use a knit lining for the body, such as ITY or other slick jersey.

    - Sleeve lining: Light-weight woven lining such as rayon bemberg or or crepe de chine, for both stretch & non-stretch blazers.

    - Pocket lining: Stable woven such as quilting cotton for shirting.

    - Interfacing: Mid-weight weft fusible interfacing and mid- weight knit fusible interfacing. Optional: use heavier weight interfacing for pocket welt; fusible horsehair canvas can be used for chest shield interfacing.

  • NOTIONS:

    - Universal (for non-stretch) or stretch needle, hand sewing needle, thread

    - View A: 2 3/8 yd (2.2 m) of 1 – 1 ½” (2.5 – 3.8 cm) wide bias tape (homemade) or 5/8” – ¾” (1.5 – 1.9 cm) wide single fold bias tape (store bought)

    - View B: ½ yd (0.5 m) of 1 – 1 ½” (2.5 – 3.8 cm) wide bias tape (homemade) or 5/8”– ¾” (1.5 – 1.9 cm) wide single fold bias tape (store bought)

    - One 1 – 1 1⁄4” button (center front), six ½” – 5/8” buttons (sleeve vents) for View A only.

    - Shoulder pads (3/8”/1 cm – ½”/12 mm thick). Rounded jacket/blazer shoulder pads are best and are typically around 6.5” (16.5 cm) by 4” (10.2 cm).

    - Straight grain fusible stabilizing tape (Alternatively, if your interfacing has a direction with NO stretch, even mechanical, you can cut a ½” strip along the direction with no stretch.)


 



East Lansing

517-999-1000

shop@seamsfabric.com
325A Grove Street
East Lansing, MI 48823

Kalamazoo

269-385-3100

shop.kzoo@seamsfabric.com
3933 Gull Road
Kalamazoo, MI 49048


Seams logo. Text reads